Products

Damptex Enamel

Contents:  Damp-tex Enamel – Proprietary Modified Alkyd

Description:  Damp-Tex is a low odor interior and exterior enamel. Its specialized formulation permits it to be applied over damp and dry substrates. Damp-Tex is ideal for use in areas that are constantly subjected to moisture or high humidity conditions. DAMP-Tex is USDA approved complies with FDA title 21, Section 175.300. May be applied at temps as low as 39 F. Will resist high humidty and dry heat up to 240 degree's F.

Recommended Use:  Apply to walls, ceilings, equipment, wash down rooms, car wash,—an EPA approved fungicide incorporated in product resist mold and fungus from growing on paint.

Volume Solids:  42.3% +/- 2%

Weight Solids:  60.5% +/- 2%

Coverage:  Approximately 300 square feet per gallon @ 3 MILS DFT

Use:  1 gallon

Price:  $ 67.00      *** Special Pricing Available Upon Request ***




Monomid Clear Sealer

Contents:  Waterborne Adduct Cured Epoxy

Description:  Monomid Clear sealer is a two-component, water borne epoxy sealer designed to seal and deeply penetrate concrete or masonry, forming a hard impenetrable sub-surface. Low viscosity allows up to ¼” penetration into concrete. May be used as a sealer/finish. Very low application odor

Recommended Use:  Cure and seal over freshly poured concrete, sealer for other approved Steelcote systems, garage floors, warehouse floors. Designed to protect concrete against moisture, freeze/thaw cycles, salt, oils, while increasing life of concrete.

Volume Solids:  28.8% +/- 2%

Weight Solids:  31.5% +/- 2%

Coverage:  Approximately 200 square feet per gallon @ 3 MILS DFT

Use:  1 gallon unit

Price:  $ 67.00      *** Special Pricing Available Upon Request ***




Monomid Self Priming Finish – Waterborne Adduct Cured Epoxy

Contents:  Waterborne Adduct Cured Epoxy

Description:  Monomid SPF is a very tough, durable, water reducible epoxy coating designed for use in areas where an attractive, easily cleanable, high gloss finished is desired. Monomid complies with FDA Title 21, Section 175.300 for use in food processing and packaging facilities and is USDA approved for incidental food contact. Monomid possesses excellent flow and leveling properties and dries to an abraion-resistant finish.

Recommended Use:  Application for use on walls, ceilings, concrete floors, equipment and structural steel, clean rooms breweries, garage floors, and warehouse floors.Low VOC application.

Volume Solids:  33.5% +/- 2%

Weight Solids:  44.7% +/- 2%

Coverage:  Approximately 200 square feet per gallon @ 3 MILS DFT

Use:  1 gallon unit

Price:  $ 75.00      *** Special Pricing Available Upon Request ***




Floor-NU Finish

Contents:  Cycloaliphatic Amine Cured Epoxy

Description:  Floor-NU Finish is a high solids coating formulated to yield a tough, abrasion resistant, industrial floor surface. Will tolerate a high volume traffic, fork lifts, automobiles, other heavy equipment. Resist staining by many chemicals (Chemical chart available)

Recommended Use:  Highly versatile coating designed for industrial maintenance application. May be applied to concrete, masonry, wood, and most old coatings. Garage Floors, Automobile Dealerships, Airport Hangers, Warehouse floors, etc.

Volume Solids:  96% +/- 2%

Weight Solids:  94% +/- 2%

Coverage:  Approximately 150 square feet per gallon @ 10 MILS DFT

Use:  2 gallon unit

Price:  $ 210.00      *** Special Pricing Available Upon Request ***




MCU 2100 Type I

Contents:  Aromatic Moisture Cured Urethane

Description:  Single component moisture cured urethane is amber clear, oil free polyurethane, two coat self-priming system for concrete. Dries to touch in 45 minutes to a hard, tough, amber film that exhibits outstanding abrasion and mar resistance in 48 hours.

Recommended Use:  Finish coat for the protection of concrete surface

Volume Solids:  55% +/- 2%

Weight Solids:  61% +/- 2%

Coverage:  Approximately 200 square feet per gallon @ 3 MILS DFT

Use:  1 gallon

Price:  $ 85.00      *** Special Pricing Available Upon Request ***




Epo-Line 164

Contents:   Modified Cycloaliphatic Amine Cured Epoxy

Description:  It is virtually 100% solids, self-priming tank lining material formulated to provide excellent chemical resistance to a wide range of acids, alkalis, solvents and various solutions ( Chemical Chart available upon request). It is virtually odorless and air dries to a very hard, dense, high gloss finish that exhibits excellent abrasion resistance. May be used in conjunction with fiberglass cloth.

Recommended Use:  Heavy duty tank lining material. Use for the protection of steel or concrete substrates against acids, alkalis, solvents, reagents. Secondary containment, Chillers

Volume Solids:  98.15% +/- 2%

Weight Solids:  98.90% +/- 2%

Coverage:  Approximately 150 square feet per gallon @ 10 MILS DFT

Use:  1 gallon kit

Price:  $ 164.00      *** Special Pricing Available Upon Request ***




Quick-X Water-Out Stain

Contents:  Styrene Butadiene Modified Oligomeric Organosiloxane 5 gal units

Description:  This product is a pigmented single component, fast-drying masonry and concrete waterproofing stain for exterior or interior exposures. Resist acid, alkali, and salt water, acid rain.

Recommended Use:  Excellent for concrete exterior walls, patios, driveways, pool aprons, gives outstanding durability for chemical salt attack by repelling salt solutions from surface.

Volume Solids:  18.26% +/- 2%

Weight Solids:  27.83% +/- 2%

Coverage:  Approximately 100 square feet per gallon @ 3 MILS DFT

Use:  1 gallon

Price:  $ 85.00      *** Special Pricing Available Upon Request ***




Water-Out

Contents:  Olgomeric Organosiloxane (exterior use only)

Description:  This product is a single component, fast-drying masonry and concrete waterproofing stain for exterior or interior exposures. Resist acid, alkali, and salt water, acid rain.

Recommended Use:  Recommended for Sea Walls, roof tiles, sand lime brick

Volume Solids:  18.26% +/- 2%

Weight Solids:  27.83% +/- 2%

Coverage:  pproximately 100 square feet per gallon @ 3 MILS DFT

Use:  5 gallon

Price:  $ 500.00      *** Special Pricing Available Upon Request ***




Chemthane 1850

Contents:  Hybrid Polyurethane

Description:  Fast Cure, high penetration two-part hybrid polyurethane combined with sand to form a polymer concrete that absorbs the shock of heavy traffic without cracking or disbanding.

Recommended Use:  Ideal for hairline or larger cracks in concrete where future movement is not anticipated. Also used to repair damaged control joints, connecting broken slabs, securing bolts, rails.

Volume Solids:  63%

Weight Solids:  68%

Coverage:  NA

Use:  2 gallon unit

Price:  $ 110.00      *** Special Pricing Available Upon Request ***




MCU 2100 Type IV Stainless Steel

Contents:  Aromatic Moisture Cured Urethane

Description:  It is a single package, stainless steel filled urethane coating designed to afford superior abrasion and chemical resistant properties that outperform conventional epoxies and polyurethanes. Uses high quality, 18/8/316-grade stainless steel flake. Exhibits excellent wetting properties that allow it to adhere tenaciously to power tool cleaned rusted surface when dry abrasive blasting is not possible. Passes 2500 hour ASTM B-117-73 Salt Fog Test.

Recommended Use:  Finish coat for the protection of steel or galvanized metals in corrosive or highly abrasive environments.

Volume Solids:  54% +/- 2%

Weight Solids:  69.1 % +/- 2%

Coverage:  Approximately 200 square feet @ 3 MILS DFT

Use:  1 gallon

Price:  $ 185.00      *** Special Pricing Available Upon Request ***




Epo-Lux 221-SP

Contents:  Polyamide-Cured Epoxy

Description:  Fast cure epoxy coating system formulated for an easy 1 to 1 mix ratio using high performance resins and curing agents. Provides a tough, yet very flexible barrier that exhibits a high gloss finish

Recommended Use:  Swimming Pools, Fountains, Sewer Plants, Waste Water Treatments

Volume Solids:  59% +/- 2%

Weight Solids:  71% +/- 2%

Coverage:  Approximately 200 square feet per gallon @ 5 MILS DFT

Use:  2 gallon unit

Price:  $ 185.00      *** Special Pricing Available Upon Request ***




Epo-Lux 520

Contents:  Proprietay Linear Polyurethnae

Description:  Chemical resistant aliphatic polyuretane, it is the state of the art in gloss and color retention and offers superior resistance to a wide variety of chemicals. Dense, tight urethane, which is particularly resistant to staining by inks, tires containing sulfur and skydrol.

Recommended Use:  Extremely efficient for exterior and interior surfaces, new or old. Designed for applications on metal, concrete or masonry surfaces and is suitable for floors, walls, ceilings, tanks, and equipment, etc. Specifically recommended for hangar floors, clean rooms, and many other area's dificult to clean. Holds up extremely well to the outdoor elements, thermal shock, sun, rain, acid rain, etc.

Volume Solids:  56.5% +/- 2%

Weight Solids:  70% +/- 2%

Coverage:  300 sq ft. @ 3 MILS DFT per gallon

Use:  3 gal unit

Price:  $ 440.00      *** Special Pricing Available Upon Request ***




DTM

Contents:  Alkyd

Description:  This coating developed as a fast dry, single coat system that weathers with superior gloss retention and anti-corrosive properties.Has shown superior performance in salt fog and humidity endurance@ film build of 2.5 to 3.0 wet mils. Standard colors Black and White can color match for specific quantites

Recommended Use:  Direct to metals

Volume Solids:  53% solids

Weight Solids:  not available

Coverage:  300 square feet per gallon

Use:  5 gallon

Price:  $ 245.00      *** Special Pricing Available Upon Request ***




Poool Shield CRX

Contents:  Chlorinated Rubber Epoxy

Description:  Pool shield was developed as a fast dry good color retention pool coating

Recommended Use:  Coating pools and fountains

Volume Solids:  Not applicable

Weight Solids:  66%

Coverage:  400 square feet @ 2mils dft

Use:  1 gallon

Price:  $ 69.00      *** Special Pricing Available Upon Request ***




We will color match specific colors!

* minimum 15 gallons and some products have minimum purchase requirement

Standard Colors


A023
Silver Gray


L092
Slate Blue


R013
Tile Red


G099
Dark Green


A022
Light Gray


L003
Marine Blue


N119
Ivory


Y029
Safety Yellow


A025
Medium Gray


L004
Rigging Blue


N076
Tan


R070
Safety Red




We also can match other colors for large quantities!

800+

Floors Treated

30,000+

Gallons Sold

1,500+

Happy Clients

Get in Touch

Office:
2255 lakeshore
Cuba, MO 65453

Factory:
25098 State St East
Carondolet, IL 62240

ddarrough@industrialcoatingsdistributor.com

+1 636 448 8021